The main aim of the project is to acquire real-time data of distribution transformers remotely over internet falling under the category of Internet of Things-IOT. For this real-time scenario we take one temperature sensor, one potential transformer and one current transformer for monitoring T, V, I data of the transformer and then send them to a remote location anywhere in the world.
These three analog values are taken in multiplexing mode connected to a programmable microcontroller of 8051 family through an ADC 0808. Then the values of all the sensors are sent sequentially as per the frequency of multiplexing of the ADC by MC .
They are then sent directly through an Wi-Fi module under TCP IP protocol to a dedicated IP that displays the data in real time chart form in any web connected PC / Laptop for display in 3 different charts. The real time data is also seen at the sending end upon a LCD display interfaced to the microcontroller.
The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller , 3.3 volt for the Wi-Fi unit and other components.
Get 100% Assured Successful Results
A simple and effective plan that assures you the best scores, a plan that gives you time to read, learn, practically experience the whole workings of your project and create a successful unit you can proudly showcase. And the best part is this… even if your own project unit malfunctions... you will still have a ready-made project unit for yourself, just in case there is a last minute issue that you or your teammates could not solve. Confused? Well let me explain.
Plan A: Create A Successful Project Model By Yourself
Plan B: Have A Expertly-Made & Quality-Tested Replica Of Your Project For Assured Results
So here’s how it works.
In my engineering days, we used to struggle replicating a PCB model from our text books with real tools. We had a tough time with the circuits and most of the time - they used to fail. So I wanted to solve this problem not just for myself but for all my fellow students like you. Young, energetic and knowledgeable youth who really want to learn but still cannot afford to fail with the project because it matters and the colleges rarely help us out productively.
So I want to give you a beautiful DIY model of the project that also includes:
- A Complete set of tools, circuit diagrams, tested PCD, zero board, audiovisuals and everything else you will need to execute your project to perfection.
- A ready-made unit of the project itself, so that you can actually see, test and learn in real-time and if by any chance you could not complete the unit by yourself - can submit this unit for an assured first-class score.
Sounds like a dream? Well, yes it is and here’s how you can benefit from this project not just in your final year but also help you with your interviews and in the future too.